SimCom GL100 Spezifikationen PDF herunterladen (Seite 12)

- 11 -

GT300 @Track Air Interface Protocol

3.2.2. Base Equipment Information

The AT+GTBEI command is used to configure the base equipment information of the terminal,

including the threshold of over-speed alarm, the interval to send information report(including

ICCID, GSM signal level, battery level and the status of charger), the parameters of the secondary

backend server and the visibility of SIM card contacts.

Example: AT+GTBEI=gt300,,,0,80,0,0,10, 116.228.221.61

,7003,,,0,0001

Parameter

Length(byte)

Range/Format

Default

password

4~8

„0‟-„9‟,‟a‟-„z‟,‟A‟-„Z‟

gt300

reserved

<=8

reserved

<=20

location by call

0|1|2|3|4

speed alarm

<=3

0-999(km/h)

info. Report

<=4

0-1440(minute)

reserved

0|1

reserved

<=3

0|10~360(minute)

second server IP

<=15

second server port

<=5

reserved

<=20

empty

reserved

<=20

empty

SIM contact enable

0|1

serial number

0000-FFFF

¾ AT+GTBEI=

— <reserved>: The parameter field is reserved.

— <location by call>: Set the working mode of the location by call function.

0: Disable this function.

1: When there is an incoming call, the device will send its current location to the

backend server by message +RESP:GTLBC.

2: Only if the number of the incoming call is within the local phone book, the device

will send its current location to the incoming call via SMS with Google Maps

hyperlink.

3: The device will send its current location to the incoming call number via SMS with

Google Maps hyperlink.

4: The device will hang up the incoming call and send its current location to the

incoming call number via SMS with Google Maps hyperlink.

— <speed alarm>: If this threshold is greater than zero, whenever GPS information is obtained,

the terminal will compare its current speed with this limit. If the speed of the terminal is

over this limit, an over speed alarm is sent out to the backend server.

— <info. report>: The interval to periodically report information including ICCID, GSM signal

level, battery level, the status of charger, Time and Date menu status, offset of time zone and

the daylight saving setting.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Kommentare zu diesen Handbüchern

Keine Kommentare

SimCom GL100 Spezifikationen Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Navigatoren SimCom GL100